You can use the static analysis module to adapt the parameters for a static calculation to existing conditions as specified by EN 1991-1-4. Many countries' standards are already provided in the LogiKal_® database. Wind loads can optionally be entered manually or automatically calculated by LogiKal_®. Depending on country-specific standards you can choose between different wind zones with their associated terrain categories.

Based on bar statics you can calculate the moment of inertia (lx) for each individual mullion and transom. Vertically installed windows, doors and facade elements are considered under horizontal loads (wind). For doors and windows both the verticals and the transoms are entered as single-span beams. For facade mullions the number of spans and their width is arbitrary, on the other hand, so they are defined by entering intermediate supports.

All typical glass types, such as float glass, cast glass, tempered glass, annealed glass and laminated glass, can be selected during input. The wind load can be used to calculate the tensions and bending of each pane of glass. The resulting values are compared with the requirements of the technical regulations for the use of linearly laminated glazing. The climatic load that occurs in insulating glazing due to seasonal pressure differences is taken into consideration. The deflection limits are specified by your glass supplier and can be entered directly into the static limit values.